October 26 - 28, 2021 /// Rosemont, IL
Meet us at The Quality Show 2021
MEET US AT BOOTH 1427
Explore the optical CMM machine to measure tight tolerances in high accuracy
Use code "VIP1427" for a complimentary registration.
LIVE @QUALITY SHOW 2021
Optical coordinate measurement system enables lateral probing
Optical CMM machine to measure tight tolerances
µCMM, the first purely optical CMM machine, is used to measure extremely tight tolerances in high accuracy. Users combine advantages from tactile coordinate measuring technology and optical surface measuring technology and measure the dimension, position, shape and roughness of components with only one sensor.
Vertical Focus Probing and the use in Dimensional Metrology
This new technology is an extension of the Focus-Variation technology and hence a pure optical measurement technology. It allows the measurement of vertical walls and micro holes directly without articulating the sample during the measurement. Read in this recently published R&D paper more about the measurement principle of Vertical Focus Probing and the impact of this method with respect to micro hole measurement and 3D measurements of steep flanks with a slope angle of more than 90°. For all measurements the optical coordinate measurement machine µCMM is used.
26 - 28 OCTOBER, 2021
Meet us at Quality Show in Rosemont, IL
For a free guest ticket enter Code "VIP1427".
Bruker Alicona @Quality Show 2021
Highly accurate optical 3D measurement systems
With the Bruker Alicona G5plus users benefit from a micro-coordinate 3D measuring machine and a surface roughness measuring device, combined in a single system. The principle of Focus-Variation allows the measurement of shape and roughness on small, large and heavy components. With an automation interface, InfiniteFocus can also be used for fully automatic measurement in production.
InfiniteFocusSL is a cost efficient optical 3D measurement system for easy, fast and traceable measurement of form and finish on micro structured surfaces. Users measure both form and roughness of components with only one system. Measurements are achieved in seconds and features, such as a coaxial laser for quick and easy focusing, further increase usability. With an automation interface, InfiniteFocusSL is also applied for fully automatic measurement in production.
Learn more about
Opening New Doors for production metrology
In this webinar you will learn how dimension, position, shape and roughness of complex geometries can be measured with only one sensor. Furthermore, you will receive information on the latest development of the core technology focus variation - 3D hole measurement.
Gear shaft inspection with the optical µCMM
This report shows measurement results measured with the µCMM - the world's first optical-only 3D CMM. The measuring object is a faulty gear shaft, measured with the µCMM and a rotation unit (Real3D).